Description

→ This electrolysis cell is designed and was tested during a long time to offer some lab/teachers/users… the ability to produce chlorates/perchlorates/other chemicals without brine leaking.

Several Kg of perchlorate can be produced with this cell “easily” with the PbO2 anode without changing the anode, by starting from chlorate brine.

You can find some example of mounting information on Youtube ! (coming soon)
Due to little size, it is recommended to use a tiny amount of standard glue like PVC based with acetone/ethyl-acetate as solvent, for school application for example.
Neoprene based glue can works as well during 5 to 10 weeks usually.

If you guys need larger ones, I’ll produce larger hermetic cells in the future.

Content :
So far there are 3 options :
1) Everything (1 MMO +1 PbO2) anode with 2 “inox connectors” you have to glue/switch it yourself to your tank.
2) Everything (1 MMO +1 PbO2 anode) with 4 “inox connectors” to bolt yourself to your tank.
3) Everything (1 MMO + 1 PbO2 anode) +1 Platinum coated Anode + 4 “inox connectors” to bolt yourself to your tank.

“Everything” including :

– 1 Anode MMO
– 1 Anode PbO2
– 9xBolt Inox M3x18mm
– 1 Washer Ring PTFE 5x12x2mm
– 4 Washer Ring PTFE M8x18x2mm
– 1 Nut Hex M4 flanged (anode)
– 2 Nuts Hex M8 Inox 304 A2
– 1 Pipe PTFE 6x8mm 30Cm
– 2 Loop connectors blue
– 1 Loop connector red
– 4 Connectors cable gland 316 M8
– 2 Covers Inox SS316 in 50x50mm
– 1 Body PTFE 50mm
– 1 Sheet of fiberglass (to wrap your anode and protect against short circuit).

Additional information